I have an HP ProCurve 2910 switch with three vlans (I posted the config below) I need vlan 2 to be completely separate from vlan 1 and 3. In the current config, I can still access the other two vlans. Any help from ze spicey people would be appreciated! Thank you!
hostname "HS_MDF_50"
module 1 type J9148A
module 2 type J9165A
module 3 type J9165A
interface 44
name "Mitel_3300"
exit
interface 45
name "Voice"
exit
interface 46
name "ESXi_Voice"
exit
trunk 47 Trk2 Trunk
trunk 48 Trk3 Trunk
trunk 2-9 Trk4 Trunk
ip routing
vlan 1
name "Private"
untagged 1,12-43,A1,B1
ip address 172.20.0.50 255.255.0.0
tagged Trk2-Trk4
no untagged 10-11,44-46
exit
vlan 2
name "Public"
untagged 10-11
ip address 10.0.0.1 255.255.255.0
exit
vlan 3
name "voice"
untagged 44-46
qos priority 6
ip address 192.168.0.1 255.255.254.0
tagged 10-43,A1,B1,Trk2-Trk4
voice
exit
qos type-of-service ip-precedence
ip route 0.0.0.0 0.0.0.0 172.20.100.200
snmp-server community "public" unrestricted
spanning-tree Trk2 priority 4
spanning-tree Trk3 priority 4
spanning-tree Trk4 priority 4
loop-protect 1,10-46,A1,B1,Trk2-Trk4
password manager
password operator