I have a situation where 1 access point does not connect devices. We have Cisco 5500 series controller and about 60 Cisco 2600 series access points in building. Only 1 access point is having issue. I can ping the ip of access point and see it is joined to the controller. The access point configuration is same as the other access points. We have 2 SSID and when we connect to SSID1 it connects the devices and works normal. I see clients associated to AP on the controller. When we try to connect to SSID2 it does not connect. It does broadcast the SSID2 and I see Client listed on the controller with SSID2 and has IP address but ping fails from controller. On the device it gets 169.XX.XX.XX address and says no internet connectivity. I checked the port it is connected to switch and its trunk port and same configuration as the other ports...
↧